Analyze the operation method to extend the service life of the CNC cutting machine

With the rapid development of the whole house customization industry, the CNC cutting machine has become an important production equipment for customized furniture. Today, I will analyze the life of the most concerned machine from six aspects. Among them, whether the operation is standardized is one of the important elements, so it needs to be strictly followed Instructions for operation and compliance with safe use specifications, so that many hidden troubles can be eliminated, it is necessary to develop good operating habits, strict compliance with the machine manual will greatly extend the service life of the machine.

The following is a summary of the six points, let’s take a look

1. Check before turning on the machine every day; for example, whether the communication line, power line, and motor line are loose and whether the voltage is stable; then turn on the power of the machine and operate the machine to move back and forth twice before starting work.

2. Clean the sensor and proximity switch to prevent dust, powder and oil from staining the sensor, affecting its sensitivity or causing non-touch.

3. Clean the dust and debris on the exposed guide rails and racks.

4. After the day's work is completed, first take off the carving knife and let the spindle chuck and lock nut be in a relaxed state. This is helpful to extend the service life of the spindle chuck, and then clean the work surface, which can be cleaned with a brush.

5. The air-cooled spindle should be kept clean at the fan, free of debris, and will not affect heat dissipation.

6. Move the machine head to the lower left or lower right position to prevent collision, and then cut off the power.